Toolpath Calculation

  • Application Uls
    • Auto Convert to 5 axis
  • Calculation based on Additive Manufacturing
    • General
      • Additive Path Attributes
      • Offsets
    • Fused Deposition Modeling
      • Feeds
      • Surface paths
        • Sorting
        • Utils
        • Workpiece
      • Walls
        • Basic
        • Corner detection
        • Ironing
        • Morph
        • Sorting
        • Start Point Strategy
        • Utilities walls
      • Infill
        • Basic
        • Top Bottom layer
        • Infill pattern
      • Support
        • Support options
        • Support interface
      • Adhesion
      • Links
        • Basic
        • Global basic
        • Retracts
      • Tool axis control FDM
      • Workpiece selection global
      • Layer
        • Slicing
        • Vertical limits
    • Selective Laser Melting (PBF)
      • Surface paths
        • Input
        • Workpiece selection global
      • Slicing
        • Machining
        • Slicing
        • Utils
      • Regions
        • Machining
        • Regions
        • Downskin
        • Upskin
        • Upskin remelting
        • Upskin recoating
      • Contours
        • Machining
        • Contour
        • Sorting
        • Blocked paths
      • Hatching strategies
        • Machining
        • Pattern
        • Rotation parameter
        • Merge
        • Sorting
        • Chess pattern
          • Field order
        • Parallel pattern
        • Stripes pattern
      • Build
      • Output
  • Calculation based on Contouring
    • Feeds
    • Corners
    • Gouge check
    • Surface paths
      • Exclude curves
      • Extensions
      • Geometry selection
      • Machining
      • Start point
      • Surface quality
      • Tool shift
    • Tool axis control
      • Machining type
      • Tool orientation strategy
    • Link
      • Entry - Exit
        • Home Position
        • Retract to clearance area through tube center
      • Gaps along cut
        • Direct
        • Follow surfaces
        • Blend Spline
        • Retract to feed distance
        • Retract to rapid distance
        • Retract to clearance area
        • Retract to incremental clearance plane
        • Clearance blend spline
      • Links between slice
        • Direct
        • Follow surfaces
        • Blend spline
        • Retract to feed distance
        • Retract to rapid distance
        • Retract to clearance area
        • Retract to incremental clearance plane
        • Clearance blend spline
      • Links between passes
        • Direct
        • Follow surfaces
        • Blend Spline
        • Retract to feed distance
        • Retract to rapid distance
        • Retract to clearance area
        • Retract to incremental clearance plane
        • Clearance blend spline
      • Clearance area
        • Clearance area
          • Automatic
          • Cylinder
          • Plane
          • Sphere
          • Surfaces
          • Tool orientation
        • Incremental clearance plane
        • Advanced options for clearance area
          • Angle step for feed moves
          • Angle step for rapid moves
            • Exact angle step
          • Connection along tool axis
          • Keep initial orientation until distance
          • Virtual fixture plane
      • Retract distances
        • Distances
          • Air move safety distance
          • Automatic
          • Entry/Exit feed distance
          • Rapid distance
      • Round corners
        • Between approach/retract and link
      • Default Lead In/Out
        • Flip
        • Leads options
          • Height
          • Auto arc sweep
          • Feed rate
          • Fillet
          • Lead type arc
          • Lead type line
        • Tool axis orientation
          • Fixed
          • Normal to lead
          • Tangential
            • Maximum lead angle change
          • Tilted
          • User defined direction
        • Type
          • Tangential arc
          • Reverse tangential arc
          • Vertical tangential arc
          • Reverse vertical tangential arc
          • Horizontal tangential arc
          • Orthogonal arc
          • Tangential Line
          • Reverse Tangential line
          • Orthogonal line
          • Reverse orthogonal line
          • Vertical profile ramp
          • Reverse vertical profile ramp
          • Position line
          • Along tool axis
          • Fade
    • Utility
      • Tool inspect/change interval
        • Description
        • Distance
        • Time
        • Number of tools
  • Calculation based on Deburring
    • Feeds
    • Surface paths
      • Geometry Input
        • Advanced edge definiton
      • Path parameters
      • Surface quality
    • Tool axis control
      • Clearances
      • Tilting
      • Tool contact
    • Link
      • Clearance area
      • Lead InOut
      • Links
    • Utility
      • Tool inspect/change interval
        • Description
        • Distance
        • Time
        • Number of tools
  • Calculation based on Drilling
    • Surface Paths
      • Break Peck Drilling
      • Peck drilling
    • Gouge check
    • Link
      • Entry - Exit
      • Gaps along cut
      • Retracts
        • Advanced options for clearance area
          • Connection along tool axis
          • Exact Angle Step
          • Virtual fixture plane
        • Clearance area
        • Distances
    • Feeds
      • Feed rates
      • Machining parameters
      • Rapid retract
      • Working coordinate system
  • Calculation based on Existing Toolpath
    • Convert
      • Links
        • Clearance area
          • Advanced options for clearance area
            • Connection along tool axis
            • Angle steps for feed movements
            • Angle steps for rapid movements
              • Exact angle step
            • Keep initial orientation until distance
          • Clearance area
            • Automatic
            • Cylinder
            • Plane
            • Sphere
            • Surfaces
            • Don't exceed clearance area
          • Incremental clearance plane
          • Tool Orientation
        • Entry/Exit
          • Custom approach/retract link
          • Home position
          • Retract to clearance area through tube center
        • Gaps along cut
          • Blend spline
          • Clearance blend spline
          • Direct
          • Follow stock
          • Follow surfaces
          • Retract to clearance area
          • Retract to feed distance
          • Retract to incremental clearance plane
          • Retract to rapid distance
          • Step
        • Lead-In/Out
          • Flip
          • Leads options
            • Additional lead parameters
            • Auto arc sweep
            • Feed rate
            • Fillet
            • Lead type arc
            • Lead type line
          • Tool axis orientation
            • Fixed
            • Tangential
              • Maximum lead angle change
            • Tilted
            • User defined direction
          • Type
            • Along tool axis
            • Automatic arc
              • Align towards previous - next cut
              • Automatic tilted automatic arc
            • Fade
            • Horizontal tangential arc
            • Orthogonal arc
            • Position line
            • Reverse orthogonal line
            • Reverse vertical profile ramp
            • Reverse vertical tangential arc
            • Reverse tangential line
            • Tangential arc
            • Vertical profile ramp
            • Vertical tangential arc
        • Links between passes
          • Blend spline
          • Clearance blend spline
          • Direct
          • Follow stock
          • Follow surfaces
          • Retract to clearance area
          • Retract to feed distance
          • Retract to incremental clearance plane
          • Retract to rapid distance
          • Step
        • Links between slice
          • Blend spline
          • Clearance blend spline
          • Direct
          • Follow stock
          • Follow surfaces
          • Retract to clearance area
          • Retract to feed distance
          • Retract to incremental clearance plane
          • Retract to rapid distance
          • Step
        • Retract Distances
          • Distances
            • Automatic
            • Air move safety distance
            • Entry/Exit feed distance
            • Feed distance
            • Rapid distance
            • Rapid distance in tool plane
              • Plane angle
            • Z-Height
        • Round corners
          • Between approach/retract and link
      • Feeds
        • Feed rates
        • Rapid Retract
        • Feed rate control
          • Feed control zone
          • Surface radius based feed optimization
          • First cut feed rate percentage
          • Description
          • Use rapid feed rate
        • Working coordinate system
        • Machining parameters
      • Gouge Check Tab
        • Check Geometries
        • Check tool parts
          • Bull end mill
          • Chamfer mill corner
          • Chamfer mill without radius
          • Dove mill no radius
          • Dove mill with corner radius
          • Flat end mill
          • Lollipop mill
          • Slot mill corner radius
          • Slot mill no radius
          • Sphere end mill
          • Taper mill with corner radius
          • Taper mill with full radius
          • Taper mill without corner radius
        • Remaining Collisions
          • Description
          • Remaining colliding contours or links
          • Report remaining collisions for all strategies
          • Stop tool-path calculation
        • Strategies
          • Advanced options for gouge check
            • Check gouge between positions
            • Check link motions against containment
            • Check link motions for collisions
            • Check tool tip
            • Extend tool to infinity
          • Report Collisions
          • Retract tool
            • Advanced options
              • How it works - Advanced Options
              • Move tool outwards whereever needed
              • Project tool inwards whereever needed
              • Remove areas where tool drop fails
              • Reverse
            • Along Surface Normal
              • After collision checking
              • Apply multi passes after projection
              • Before collision checking
              • Moving tool along surface normal
            • Along to cut center
              • File example
            • Along tool axis
              • Advanced option - Drop tool after transform or rotate
              • Dropping
              • Drop tool down
              • How it works
              • Rotate
              • Smooth retracts
            • Along tool contact line
              • File example
            • Along tool plane
            • Along X,Y and Z direction
              • in XY, XZ and YZ plane
              • optimized in XY, XZ and YZ
              • Some Example
              • to +X, -X, +Y, -Y, +Z and -Z axis direction
              • user defined direction
            • Away from origin
          • Stop toolpath calculation
            • Example
          • Tilt tool
            • 3 to 5 axis conversion
              • 5 axis but stay close to
              • Gradual tilting only on connection
              • Max. tilt angle
              • Misc
              • Short / long distance threshold
              • Tilting
              • Where the tool does fit (long distance)/Short distance (collision free toolpath)
              • Where the tool does not fit (collision between holder and check/part surfaces)
            • Automatic
              • Advanced control
              • After collision checking
              • toolpath Calculation - Collision control - Automatic tilting
            • Change fixed tilt angle
            • Clearance angle
              • How it works
              • Note
            • Smoothing advanced options
              • Blending Distance
              • Blending Distance - How it works
              • Smoothing - How it works
            • Use lead lag angle / side tilt angle
              • Advanced control
          • Trim and relink toolpath
            • Advanced Options
            • Description
        • Tool Clearance
          • Angular clearance
          • Cylindrical clearance - Arbor
          • Cylindrical clearance - Holder
          • Cylindrical clearance - Shaft
          • Description
      • Roughing Tab
        • Area Roughing
          • Description
          • How it works
        • Depth cuts
          • Apply depth to
          • Description
          • Sorting
          • Use ramp
        • Mirror
          • Mirror parameters
        • Morph pocket
          • Description
          • File example
          • The morphing options
        • Multi passes
          • Description
          • Gradual machining angle XY change
        • Plunge
          • Description
          • File Example
        • Rotate transform
          • Description
          • Orientation
          • Rotate
          • Sorting
          • Transform
        • Sorting
          • Connect slices by the shortest distance
          • Description
          • In case of complete toolpath
          • In case of passes
      • Surface paths
      • Tool axis control
        • Common direction
        • Output format
          • 3 axis output format
          • 4 axis output format
          • 5 axis output format
          • Description
        • Run Tool
          • Run Tool
            • Auto
            • Bull end mill
            • Center
            • Chamfer mill corner
            • Chamfer mill without radius
            • Description
            • Dove mill no radius
            • Dove mill with corner radius
            • File Example Auto
            • File Example Center
            • File Example Front
            • File Example Radius
            • Flat end mill
            • Front
            • Lollipop mill
            • Note
            • Radius
            • Settings
            • Slot mill corner radius
            • Slot mill no radius
            • Sphere end mill
            • Taper mill with corner radius
            • Taper mill with full radius
            • Taper mill without corner radius
          • User given point
            • Description
            • Front shift
            • Gradual Front shift change
            • Side shift
        • Tilting Strategies
          • Tool axis will be tilted around axis
            • Description
            • Example
          • Tool axis will be tilted from point away
            • Description
            • Fixed tilt angle
            • How it works
            • Note
          • Tool axis will be tilted into plane
          • Tool axis will be tilted relative to cutting direction
            • Advanced Options
              • Align tool to planar surface edges
                • Description
                • How it works
                • Note
              • Allow flipping side direction
                • Description
                • File Example
                • Note
              • Gradual Lead angle change
                • Description
                • File Example
                • Note
              • Gradual side tilt angle change
                • Description
                • File Example
                • Note
              • Ruled Surface Radius Limit
                • Description
                • File Example
                • Note
              • Side tilt fanning distance
                • Description
                • Note
            • Set side tilt by
            • Side Tilt Definition
              • Follow surface ISO parametric direction
                • Advanced options
                • File Example
                • Follow surface isometric direction
                • Note
              • Ortho to cut direction at each contour
                • Advanced options
                • Approximate by one vector
                • Approximate by two vectors
                • Approximate smooth
                • Approximate smooth local
                • Description
                • Note
              • Ortho to cut direction at each position
                • Advanced options
                • Description
                • How it works
                • Note
              • Ortho to lower edge curve
                • Description
                • How it works
                • Note
              • Use spindle main direction
                • Description
                • How it works
                • Note
              • Use tilt lines
                • Note
                • Description
              • Use user defined direction
                • Description
                • How it works
                • Note
          • Tool axis will be tilted relative to machining layer
            • Description
            • Global lead angle
            • Global side angle
            • How it works
            • Impeller rotation axis
            • Note
            • Tilt lines
          • Tool axis will be tilted through curve
            • Advanced Options
              • Tilt relative to cutting direction
                • Curve tilt fanning distance
                • Tilting strategies
            • Curve Tilt Type
              • Angle from curve
                • Description
                • File Example
                • Fixed tilt angle
                • How it works
                • Note
              • Angle from spindle, main direction
                • Description
                • Fixed tilt angle
                • How it works
                • Note
                • Settings
              • Automatic curve
                • Description
                • How it works
                • Note
              • Closest point
                • Description
                • File Example
                • Fixed tilt angle
                • How it works
                • Note
              • From start to end
                • Description
                • How it works
                • Note
              • From start to end for each contour
                • Description
                • Gradually means
                • Note
          • Tool axis will be tilted through lines
            • All lines weighted by distance
            • All lines weighted by distance or Always closest to surface
            • Always closest two lines
            • Closest to surface
            • Tilted throuh lines
          • Tool axis will be tilted through point
            • Description
            • Further Options
            • Note
          • Tool axis will be tilted with an angle
            • Description
            • How it works
            • Note
            • Pole Limit
            • Reverse tool
            • Tilt angle
            • Tool axis crossed tilt axis
          • Tool axis will be tilted with fixed angle to axis
            • Description
            • How it works
            • Note
            • Reverse tool
            • Rotary angle
            • Tilt angle
            • Tool axis crossed tilt axis
          • Tool axis will be titled from curve away
            • Advanced Options
              • Tilt relative to cutting direction
                • Curve tilt fanning distance
                • Tilting strategies
            • Curve Tilt Type
              • Angle from curve
                • Description
                • Fixed tilt angle
                • How it works
                • Note
              • Angle from spindle, main direction
                • Description
                • File Example
                • Fixed tilt angle
                • How it works
                • Note
              • Closest point
                • Description
                • Fixed tilt angle
                • How it works
                • Note
              • From start to end
                • Description
                • How it works
                • Note
              • From start to end for each contour
                • Description
                • File Example
                • Gradually means
                • Note
        • Tool Axis direction Limit Parameters
          • Conical angles from leading curves
            • Description
            • Example
            • How it works
            • Note
          • XY Limit
            • Description
            • File Example
          • XZ Limit
            • Description
            • File Example
          • YZ Limit
            • Description
            • File Example
      • Utility
        • Axial shift
          • Description
          • Constant for each contour
          • Gradual for all cuts
          • Gradual for each contour
          • Damp
            • How it works - Damp
          • Note
        • Miscellaneous
          • Set Y axis machine limit
          • Smooth surface normals
          • Calculation based on tool center
            • How it works - Calculation based on tool center
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
    • Convert 3 to 5 axis
      • Feeds
      • Links
        • Links for gaps (trimmed toolpaths)
        • Lead in/out
        • Clearance plane height
        • Distances
      • Surface Paths
        • Check and report any remaining collisions
        • Contour feed rates
        • Notify when the toolpath has been trimmed
        • Point interpolation
        • Tool clearances
      • Tool axis control
      • Utility
        • Axial shift
        • Miscellaneous
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
    • Dropping
      • Feeds
        • Feed rates
        • Rapid retract
        • Working coordinate system
        • Machining parameters
      • Gouge check
        • Check geometries
        • Check tool parts
        • Remaining Collisions
        • Strategies
          • Advanced options for gouge check
          • Report Collisions
          • Retract tool
            • Retract Advanced Options
            • Retract Along Surface Normal
            • Retract Along To Cut Center
            • Retract Along Tool Axis
            • Retract Along Tool Contact Line
            • Retract Along Tool Plane
            • Retract Along X, Y and Z direction
            • Retract Away From Origin
          • Stop Toolpath Calculation
          • Tilt tool
            • Changed fixed tilt angle
            • Clearance angle
            • Smoothing advanced options
            • Tilt Automatic
            • Use lead lag angle / side tilt angle
          • Trim and Relink
        • Tool clearance
      • Tool axis control
        • Common direction
        • Limit by axis angle range
        • Maximum angle step
        • Output format
        • Run tool
          • Run tool at user given point
        • Tilting strategies
          • Tool axis will be tilted around axis
          • Tool axis will be tilted from curve away
            • Advanced options
            • Curve tilt type
              • Angle from curve
              • Angle from spindle, main direction
              • Closest point
              • From start to end
              • From start to end for each contour
          • Tool axis will be tilted from point away
          • Tool axis will be tilted into plane
          • Tool axis will be tilted relative to cutting direction
            • Advanced options
              • Align tool to planar surface edges
              • Allow flipping side direction
              • Gradual lead angle change
              • Gradual side tilt angle change
              • Ruled surface radius limit
              • Side tilt fanning distance
            • Set side tilt by
            • Side tilt definition
              • Follow surface ISO parametric direction
              • Ortho to cut direction at each contour
              • Ortho to cut direction at each position
              • Ortho to lower edge curve
              • Use spindle main direction
              • Use tilt lines
              • Use user defined direction
          • Tool axis will be tilted relative to machining layer
          • Tool axis will be tilted through curve
            • Curve tilt type
              • Angle from curve
              • Angle from spindle, main direction
              • Automatic curve
              • Closest point
              • From start to end
              • From start to end for each contour
            • Tilt relative to cutting direction
          • Tool axis will be tilted through lines
          • Tool axis will be tilted through point
          • Tool axis will be tilted with an angle
          • Tool axis will be tilted with fixed angle to axis
          • Tool axis will be tilted with fixed angle to surface normal
      • Utility
        • Axial shift
          • Description
          • Constant for each contour
          • Gradual for all cuts
          • Gradual for each contour
          • Damp
            • How it works - Damp
          • Note
        • Miscellaneous
          • Set Y axis machine limit
          • Smooth surface normals
          • Calculation based on tool center
            • How it works - Calculation based on tool center
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
    • Link 2 toolpaths
      • Feeds
        • Feed rates
        • Rapid retract
        • Working coordinate system
        • Machining parameters
      • Utility
        • Axial shift
          • Description
          • Constant for each contour
          • Gradual for all cuts
          • Gradual for each contour
          • Damp
            • How it works - Damp
          • Note
        • Miscellaneous
          • Set Y axis machine limit
          • Smooth surface normals
          • Calculation based on tool center
            • How it works - Calculation based on tool center
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
    • Wrapping
      • Feeds
      • Surface Paths
      • Tool Axis Control
        • Output format
        • Maximum angle step
        • Tilting Startegies
          • Tool axis will be tilted relative to cutting direction
            • Advanced Options
              • Align tool to planar surface edges
              • Allow flipping side direction
              • Gradual Lead angle change
              • Gradual side tilt angle change
              • Ruled Surface Radius Limit
              • Side tilt fanning distance
            • Set side tilt by
            • Side Tilt Definition
              • Follow surface ISO parametric direction
              • Ortho to cut direction at each contour
              • Ortho to cut direction at each position
              • Ortho to lower edge curve
              • Use spindle main direction
              • Use tilt lines
              • Use user defined direction
          • Tool axis will be tilted with an angle
          • Tool axis will be tilted with fixed angle to axis
          • Tool axis will be rotated around axis
          • Tool axis will be tilted through point
          • Tool axis will be tilted through curve
            • Advanced Options
              • Tilt relative to cutting direction
            • Curve Tilt Type
              • Angle from curve
              • Angle from spindle, main direction
              • Automatic curve
              • Closest point
              • From start to end for each contour
              • From start to end
          • Tool axis will be tilted through lines
          • Tool axis will be tilted from curve away
            • Advanced Options
              • Tilt relative to cutting direction
            • Curve Tilt Type
              • Angle from curve
              • Angle from spindle, main direction
              • Closest point
              • From start to end for each contour
              • From start to end
          • Tool axis will be tilted from point away
          • Tool axis will be tilted relative to machining layer
          • Tool axis will be tilted into plane
        • Common direction
        • Common direction on single contours
        • Run Tool
          • Run Tool
        • Tool Axis direction Limit Parameters
          • Conical angles from leading curves
          • XY Limit
          • XZ Limit
          • YZ Limit
      • Gouge Check
        • Check Geometries
        • Strategies
          • Retract tool
            • Advanced options
            • Along Surface Normal
            • Along to cut center
            • Along tool axis
            • Along tool contact line
            • Along tool plane
            • Along X, Y and Z direction
            • Away from origin
          • Tilt tool
            • 3 to 5 axis conversion
            • Automatic
            • Change fixed tilt angle
            • Clearance angle
            • Use lead lag angle / side tilt angle
          • Trim and relink toolpath
          • Stop toolpath calculation
          • Report Collisions
          • Advanced options for gouge check
        • Remaining Collisions
        • Check tool parts
        • Tool Clearance
      • Utility
        • Axial shift
        • Miscellaneous
        • Tool inspect/change interval
          • Description
          • Distance
          • Time
          • Number of tools
    • Transform/Rotate/Mirror
      • Links
        • Clearance area
          • Advanced options for clearance area
            • Connection along tool axis
            • Angle steps for feed movements
            • Angle steps for rapid movements
              • Exact angle step
            • Keep initial orientation until distance
            • Virtual fixture plane
          • Clearance area
            • Automatic
            • Plane
            • Sphere
            • Surfaces
            • Cylinder
          • Incremental clearance plane
          • Tool Orientation
        • Entry/Exit
          • Custom approach/retract link
          • Home position
          • Retract to clearance area through tube center
        • Gaps along cut
          • Blend spline
          • Clearance blend spline
          • Direct
          • Follow surfaces
          • Retract to clearance area
          • Retract to feed distance
          • Retract to incremental clearance plane
          • Retract to rapid distance
          • Step
        • Lead-In/Out
          • Flip
          • Leads options
            • Additional lead parameters
            • Auto arc sweep
            • Feed rate
            • Fillet
            • Leads extensions
            • Lead type arc
            • Lead type line
          • Tool axis orientation
            • Fixed
            • Tangential
              • Maximum lead angle change
            • Tilted
            • User defined direction
          • Type
            • Along tool axis
            • Automatic arc
            • Fade
            • Horizontal tangential arc
            • Orthogonal arc
            • Position line
            • Reverse orthogonal line
            • Reverse tangential arc
            • Reverse vertical profile ramp
            • Tangential arc
            • Vertical profile ramp
            • Vertical tangential arc
            • Reverse tangential line
        • Links between passes
          • Blend spline
          • Clearance blend spline
          • Direct
          • Follow surfaces
          • Retract to clearance area
          • Retract to feed distance
          • Retract to incremental clearance plane
          • Retract to rapid distance
          • Step
        • Links between slice
          • Blend spline
          • Clearance blend spline
          • Direct
          • Follow stock
          • Follow surfaces
          • Retract to clearance area
          • Retract to feed distance
          • Retract to incremental clearance plane
          • Retract to rapid distance
          • Step
        • Retract Distances
          • Distances
            • Automatic
            • Air move safety distance
            • Entry/Exit feed distance
            • Feed distance
            • Rapid distance
            • Rapid distance in tool plane
              • Plane angle
            • Z-Height
        • Round corners
          • Between approach/retract and link
      • Feeds
        • Feed rates
        • Rapid retract
        • Feed rate control
          • Description
          • Feed control zone
          • First cut feed rate percentage
          • Surfaces radius based feed optimization
          • Use rapid feed rate
        • Working coordinate system
        • Machining parameters
      • Gouge check
        • Check geometries
        • Remaining Collisions
        • Status
        • Strategies
        • Tool Clearance
      • Sorting
      • Translate/Rotate/Mirror
      • Utility
        • Axial shift
          • Description
          • Constant for each contour
          • Gradual for all cuts
          • Gradual for each contour
          • Damp
            • How it works - Damp
          • Note
        • Miscellaneous
          • Smooth surface normals
          • Set Y axis machine limit
          • Calculation based on tool center
            • How it works - Calculation based on tool center
        • Tool inspection
    • FeedControl
      • Machine
      • Material
      • Surface path
      • FeedControl
        • Constraints
          • User defined
        • Toolpath optimization
      • Tools
  • Calculation based on Geodesic machining
    • Feeds
      • Feed rate control
        • Description
        • Feed control zone
        • Use rapid feed rate
      • Feed rate for links
        • Gaps along cut
        • Links between passes
        • Links between slices
    • Surface Paths
      • Area
        • Extend Trim
        • Corner settings
        • Start type
        • Step direction
        • Types
          • Determined by number of cuts
          • Entire machining area
      • Containment
        • Advanced options
          • Silhouette Containment
        • Types
      • Guide curves
        • Guide curves advanced options
        • Input types
        • Pattern types
      • Pattern
        • Advanced options
        • Calculation type
        • Machining surfaces
        • Machining surfaces offset
        • Part surfaces
      • Sorting
        • Cut order
        • Cutting Method
        • Direction for one way machining
        • Flip Step Over
        • Machine by
        • Start point
      • Stepover
      • Surface quality
        • Advanced options for surface quality
    • Gouge check
      • Check Geometries
      • Check tool parts
      • Remaining Collisions
      • Strategies
        • Advanced options for gouge check
        • Report Collisions
        • Retract tool
          • Retract Advanced Options
          • Retract Along Surface Normal
          • Retract Along To Cut Center
          • Retract Along Tool Axis
          • Retract Along Tool Contact Line
          • Retract Along Tool Plane
          • Retract Along X, Y and Z direction
          • Retract Away From Origin
        • Stop Toolpath Calculation
        • Tilt tool
          • Changed fixed tilt angle
          • Clearance angle
          • Smoothing advanced options
          • Tilt Automatic
          • Use lead lag angle / side tilt angle
        • Trim and Relink
      • Tool Clearance
    • Link
      • Round corners
        • Between approach/retract and link
      • Clearance Area
        • Advanced options for clearance area
          • Angle steps for feed movements
          • Angle steps for rapid movements
            • Exact angle step
          • Connection along tool axis
          • Keep initial orientation until distance
          • Virtual fixture plane
        • Clearance area
          • Automatic
          • Cylinder
          • Plane
          • Sphere
          • Surfaces
        • Incremental clearance plane
        • Tool Orientation
      • Entry/Exit
        • Home position
          • Start from home position - Return to home position
      • Gaps Along Cut
        • Blend spline
        • Clearance blend spline
        • Direct
        • Follow surfaces
        • Retract to clearance area
        • Retract to feed distance
        • Retract to incremental clearance plane
        • Retract to rapid distance
      • Lead In-Out
        • Flip
        • Leads options
          • Additional lead parameters
          • Auto arc sweep
          • Feed rate
          • Fillet
          • Lead type arc
        • Tool axis orientation
          • Fixed
          • Tangential
          • Tilted
          • User defined direction
        • Type
          • Along tool axis
          • Automatic arc
            • Align towards previous/next cut
            • Automatic tilted automatic arc
          • Fade
          • Horizontal tangential arc
          • Orthogonal arc
          • Orthogonal line
          • Position line
          • Reverse orthogonal line
          • Reverse tangential arc
          • Reverse Tangential line
          • Reverse vertical profile ramp
          • Reverse vertical tangential arc
          • Tangential arc
          • Tangential Line
          • Vertical profile ramp
          • Vertical tangential arc
      • Links Between Passes
        • Blend spline
        • Clearance blend spline
        • Direct
        • Follow surfaces
        • Retract to clearance area
        • Retract to feed distance
        • Retract to incremental clearance plane
        • Retract to rapid distance
      • Links Between Slices
        • Blend spline
        • Direct
        • Clearance blend spline
        • Follow surfaces
        • Retract to clearance area
        • Retract to feed distance
        • Retract to incremental clearance plane
        • Retract to rapid distance
      • Retract distances
        • Distances
          • Air move safety distance
          • Automatic
          • Entry/Exit feed distance
          • Rapid distance
    • Roughing
      • Depth cuts
      • Sorting options
      • Stock definition
      • Transform - Rotate
    • Utility
      • Axial shift
      • Miscellaneous
      • Tool inspect/change interval
        • Description
        • Distance
        • Time
        • Number of tools
    • Tool axis control
      • Common direction
      • Limit by axis angle range
      • Maximum angle step
      • Output format
      • Run tool
      • Tilting strategies
        • Tool axis will be rotated around axis
        • Tool axis will be tilted from curve away
          • Advanced options
          • Curve tilt type
            • Angle from curve
            • Angle from spindle, main direction
            • Closest point
            • From start to end for each contour
            • From start to end
        • Tool axis will be tilted from point away
        • Tool axis will be tilted into plane
        • Tool axis will be tilted relative to cutting direction
          • Advanced options
          • Side tilt by
          • Side tilt definition
        • Tool axis will be tilted relative to machining layer
        • Tool axis will be tilted through curve
          • Curve tilt type
          • Tilt relative to cutting direction
        • Tool axis will be tilted through lines
        • Tool axis will be tilted through point
        • Tool axis will be tilted with an angle
        • Tool axis will be tilted with fix angle to axis
        • Tool axis will be tilted with fixed angle to surface normal
  • Calculation based on Hole making
    • Feeds
      • Feed rates
      • Rapid retract
      • Feed rate control
        • Description
        • Use rapid feed rate
      • Working coordinate system
      • Machining parameters
    • Gouge check
      • Check Geometries
      • Check tool parts
      • Remaining Collisions
      • Strategies
        • Advanced options for gouge check
        • Report Collisions
        • Retract tool
          • Retract Advanced Options
          • Retract Along Tool Axis
        • Stop Toolpath Calculation
        • Tilt tool
          • Changed fixed tilt angle
          • Clearance angle
          • Smoothing advanced options
          • Tilt Automatic
          • Use lead lag angle / side tilt angle
        • Trim and Relink
      • Tool Clearance
    • Link
      • Clearance area
        • Advanced options for clearance area
          • Angle steps for feed movements
          • Angle steps for rapid movements
            • Exact angle step
          • Connection along tool axis
          • Keep initial orientation until distance
        • Clearance area
          • Automatic
          • Cylinder
          • Plane
          • Sphere
          • Surfaces
        • Incremental clearance plane
        • Tool Orientation
      • Approach/Retract
      • Distance in between holes
      • Lead-In/Out
        • Flip
        • Leads options
          • Feed rate
          • Tangential Extension
        • Tool axis orientation
          • Fixed
        • Type
          • Helical arc
          • Orthogonal line
      • Retract distances
        • Distances
          • Air move safety distance
      • Round corners
        • Between approach/retract and link
    • Surface Paths
      • Process
        • Main Strategy
        • Start/End Point
        • Safe Point
        • Depth
        • Dwell Time
        • Custom retract
        • Breakthrough distance
        • Peck drilling mode
        • Repeats for reaming
        • Handedness
        • Diameter
        • Offset
        • Thread type
        • Thread height
        • Radial stepover
        • Finish cuts
        • Cutting direction
        • Orientation
      • Geometry definiton
        • Offset
        • First contact
        • Input
          • Points
          • Lines
          • On Surface/ On Mesh
        • Offset shift
          • Axial shift first contact
          • Shift Normal to Surface
        • Cut tolerance
      • Ordering
  • Calculation based on Multi-Axis Additive
    • Multi-Axis Additive
      • Feeds
      • Surface paths
        • Area
        • Pattern
          • Advanced
          • Weaving
      • Multi layer
      • Advanced options
        • Path control
        • Sorting
        • Linking
          • Advanced Linking
            • Clearance area
              • Advanced options for clearance area
                • Angle steps for feed movements
                • Angle steps for rapid movements
                  • Exact angle step
                • Connection along tool axis
                • Keep initial orientation until distance
                • Virtual fixture plane
              • Clearance area
                • Automatic
                • Cylinder
                • Plane
                • Sphere
                • Surfaces
              • Incremental clearance plane
              • Tool Orientation
            • Entry / Exit
              • Custom approach/retract link
              • Home position
                • Start from home position - Return to home position
              • Retract to clearance area through tube center
            • Gaps along cut
              • Blend spline
              • Clearance blend spline
              • Direct
              • Follow surfaces
              • Retract to clearance area
              • Retract to feed distance
              • Retract to incremental clearance plane
              • Retract to rapid distance
            • Lead-In/Out
              • Flip
              • Leads options
                • Additional lead parameters
                • Auto arc sweep
                • Feed rate
                • Fillet
                • Lead type arc
                • Lead type line
              • Tool axis orientation
                • Fixed
                • Tangential
                • Tilted
                • User defined direction
              • Type
                • Along tool axis
                • Automatic arc
                  • Align towards previous/next cut
                  • Automatic tilted automatic arc
                • Horizontal tangential arc
                • Orthogonal arc
                • Orthogonal line
                • Position line
                • Reverse orthogonal line
                • Reverse tangential arc
                • Reverse Tangential line
                • Reverse vertical profile ramp
                • Reverse vertical tangential arc
                • Tangential arc
                • Tangential Line
                • Vertical profile ramp
                • Vertical tangential arc
            • Links between passes
              • Blend spline
              • Clearance blend spline
              • Direct
              • Follow surfaces
              • Retract to clearance area
              • Retract to feed distance
              • Retract to incremental clearance plane
              • Retract to rapid distance
            • Links between slice
              • Blend spline
              • Clearance blend spline
              • Direct
              • Follow surfaces
              • Retract to clearance area
              • Retract to feed distance
              • Retract to incremental clearance plane
              • Retract to rapid distance
            • Retract distances
              • Distances
                • Air move safety distance
                • Automatic
                • Entry/Exit feed distance
                • Rapid distance
            • Round corners
              • Between approach/retract and link
        • Tool axis angle limits
        • 6 Axis Control
    • Combine Operations
      • Feeds
      • Surface paths
        • Linking
          • Advanced Linking
            • Clearance area
              • Advanced options for clearance area
                • Angle steps for feed movements
                • Angle steps for rapid movements
                  • Exact angle step
                • Connection along tool axis
                • Keep initial orientation until distance
                • Virtual fixture plane
              • Clearance area
                • Automatic
                • Cylinder
                • Plane
                • Sphere
                • Surfaces
              • Incremental clearance plane
              • Tool Orientation
            • Entry / Exit
              • Custom approach/retract link
              • Home position
                • Start from home position - Return to home position
            • Gaps along cut
              • Blend spline
              • Clearance blend spline
              • Direct
              • Follow surfaces
              • Retract to clearance area
              • Retract to feed distance
              • Retract to incremental clearance plane
              • Retract to rapid distance
            • Links between slice
              • Blend spline
              • Clearance blend spline
              • Direct
              • Follow surfaces
              • Retract to clearance area
              • Retract to feed distance
              • Retract to incremental clearance plane
              • Retract to rapid distance
            • Links between passes
              • Blend spline
              • Clearance blend spline
              • Direct
              • Follow surfaces
              • Retract to clearance area
              • Retract to feed distance
              • Retract to incremental clearance plane
              • Retract to rapid distance
            • Retract distances
              • Distances
                • Air move safety distance
                • Entry/Exit feed distance
                • Rapid distance
            • Round corners
              • Between approach/retract and link
            • Lead In-Out
              • Flip
              • Leads options
                • Additional lead parameters
                • Auto arc sweep
                • Feed rate
                • Fillet
                • Lead type arc
                • Lead type line
              • Tool axis orientation
                • Fixed
                • Tangential
                • Tilted
                • User defined direction
              • Type
                • Along tool axis
                • Automatic arc
                • Horizontal tangential arc
                • Orthogonal arc
                • Orthogonal line
                • Position line
                • Reverse orthogonal line
                • Reverse tangential arc
                • Reverse Tangential line
                • Reverse vertical profile ramp
                • Reverse vertical tangential arc
                • Tangential arc
                • Tangential Line
                • Vertical profile ramp
                • Vertical tangential arc
        • Pattern
  • Calculation Based on Mold and Die Finishing
    • Feeds
    • Link
    • Surface paths
      • Geometry input
      • Path parameter
      • Pattern
      • Rest area detection
    • Tool axis control
    • Utility
      • Tool inspect/change interval
        • Description
        • Distance
        • Time
        • Number of tools
  • Calculation based on Multi-Axis Machining
    • Pattern Roughing
      • Advanced
      • Feeds
        • Feed rate control
          • Feed control zone
          • Radial chip thinning feed control
          • Use rapid feed rate
        • Feed rate for links
          • Area links
          • Links between regions
          • Links between slices
      • Area
        • Detect Thicker Than
        • 3D Containment
        • Undercuts
        • Rest roughing
      • Sorting
        • Cutting method
        • Direction for one way machining
        • Intermediate slices
        • Machine by
      • Part definition
        • Stock definition
      • Tool axis control
      • Gouge check
      • Link
        • Clearance Area
        • Adaptive links
        • Ramps
          • Approach moves
        • Retract Distances
      • Utility
        • Tool inspect/change interval
          • Description
          • Distance
          • Time
      • Advanced Depth step
    • Pattern Floor Finish
      • Feeds
      • Surface paths
        • Area
        • Sorting
          • Cutting method
          • Direction for one way machining
          • Regions/Lanes
        • Stepover
        • Surface Quality
      • Part Definition
      • Tool Axis Control
      • Gouge check
      • Link
        • Clearance area
        • Lead InOut
        • Links
      • Utility
        • Tool inspect/change interval
          • Description
          • Distance
          • Time
          • Number of tools
    • Pattern Wall Finish
      • Feeds
      • Surface paths
        • Area
        • Sorting
          • Cut Order
          • Cutting method
          • Direction for one way machining
          • Regions/Lanes
        • Step over
        • Surface Quality
      • Part defintion
      • Tool Axis Control
      • Gouge check
      • Link
        • Links
        • Lead InOut
        • Clearance area
      • Utility
        • Tool inspect/change interval
          • Description
          • Distance
          • Time
          • Number of tools
    • Pattern Rest Finishing
      • Feeds
      • Surface paths
        • Area
        • Sorting
          • Cutting method
          • Direction for one way machining
        • Step over
        • Surface Quality
      • Part definition
      • Tool Axis Control
      • Gouge Check
      • Link
        • Clearance area
        • Lead InOut
        • Links
      • Utility
        • Tool inspect/change interval
          • Description
          • Distance
          • Time
          • Number of tools
  • Calculation Based on Multiblade Parts
    • Surface Paths
      • Pattern
      • Sorting
    • Basic and Advanced version for the Impeller module
    • Blisk module
      • Variable offset
    • Edges
    • Links
    • Part definition
    • Tool axis control
      • Clearance
      • Gouge Excess
      • Limits
      • Tilting
      • Use full collision check
    • Feeds
    • Utility
      • Tool inspect/change interval
        • Description
        • Distance
        • Number of tools
        • Time
  • Calculation Based on Optics
    • Spiral
      • Feeds
      • Surface paths
        • Path
        • Surface quality
        • Projection
      • Link
        • Entry - Exit
        • Gaps along cut
        • Default Lead-In/Out
        • Clearance area
    • Radial
      • Feeds
      • Surface paths
        • Path
        • Surface quality
        • Projection
      • Links
        • Entry - Exit
        • Gaps along cut
        • Default Lead-In/Out
        • Clearance area
    • One way
      • Feeds
      • Surface paths
        • Path
        • Machining Range
        • Surface quality
        • Projection
      • Links
        • Entry - Exit
        • Gaps along cut
        • Links between slices
        • Clearance area
        • Default Lead-In/Out
        • Retract distance
    • Zig-Zag
      • Feeds
      • Surface paths
        • Path
        • Machining Range
        • Surface quality
        • Projection
      • Links
        • Entry - Exit
        • Gaps along the cut
        • Links between slices
        • Clearance area
        • Default Lead-In/Out
        • Retract distances
    • Follow guide curves
      • Feeds
      • Surface paths
        • Path
        • Surface quality
        • Projection
      • Links
        • Entry - Exit
        • Gaps along cut
        • Links between slices
        • Clearance area
        • Retract distances
        • Default Lead-In/Out
    • Spiral morph
      • Feeds
      • Surface paths
        • Path
        • Surface quality
        • Projection
      • Links
        • Entry - Exit
        • Gaps along cut
        • Clearance area
        • Default Lead-In/Out
    • Parallel Morph
      • Feeds
      • Surface paths
        • Path
        • Surface quality
        • Projection
      • Links
        • Entry - Exit
        • Gaps along cut
        • Links between slices
        • Clearance area
        • Retract distances
        • Default Lead-In/Out
    • Parallel Morph Zig-Zag
      • Feeds
      • Surface paths
        • Path
        • Surface quality
        • Projection
      • Link
        • Entry-Exit
        • Gaps along cut
        • Links between slices
        • Clearance area
        • Retract distances
        • Default Lead-In/Out
    • Drum - follow guide curves
      • Feeds
      • Surface paths
        • Path
          • Blend between curves
        • Surface quality
        • Projection
      • Links
        • Entry - Exit
        • Gaps along cut
        • Links between slices
        • Clearance area
        • Retract distances
        • Default Lead-In/Out
    • Drum - one way
      • Feeds
      • Surface paths
        • Path
        • Machining range
        • Surface quality
        • Projection
      • Links
        • Entry - Exit
        • Gaps along cut
        • Links between slices
        • Clearance area
        • Retract distances
        • Default Lead-In/Out
    • Drum - zig zag
      • Feeds
      • Surface paths
        • Path
        • Machining range
        • Surface quality
        • Projection
      • Links
        • Entry - Exit
        • Gaps along cut
        • Links between slices
        • Clearance area
        • Retract distances
        • Default Lead-In/Out
    • Drum - parallel to curve
      • Feeds
      • Surface paths
        • Path
          • Blend between curves
        • Surface quality
        • Projection
      • Links
        • Entry - Exit
        • Gaps along cut
        • Links between slices
        • Clearance area
        • Retract distances
        • Default Lead-In/Out
    • Drum - parallel to curve zig zag
      • Feeds
      • Surface paths
        • Path
          • Blend between curves
        • Surface quality
        • Projection
      • Links
        • Entry - Exit
        • Gaps along cut
        • Links between slices
        • Clearance area
        • Retract distances
        • Default Lead-In/Out
    • Ring
      • Feeds
      • Surface path
        • Path
        • Surface quality
        • Projection
      • Links
        • Entry - Exit
        • Gaps along the cuts
        • Clearance area
        • Default Lead-In/Out
    • Surface
      • Surface types
      • Parametric Surfaces
        • Parametric surfaces type
        • Operations
      • Surface offset
      • Compensation
      • Check surfaces
    • Tool axis control
    • Gouge check
      • Clearance for tool parts
      • Advanced
    • Tool Definitions
  • Calculation based on Port Machining
    • Feeds
    • Surface paths
      • Transform Rotate
    • Tool axis control
    • Gouge check
    • Link
    • Utility
      • Tool inspect/change interval
        • Description
        • Distance
        • Time
        • Number of tools
  • Calculation based on Probing
    • Feeds
    • Link
      • Clearance area
        • Additional Parameter
        • Advanced options for clearance area
          • Angle steps for feed movements
          • Angle steps for rapid movements
            • Exact angle step
          • Connection along tool axis
          • Keep initial orientation until distance
          • Virtual fixture plane
        • Clearance area
        • Incremental clearance plane
        • Tool Orientation
      • Entry/Exit
      • Tool axis limits
        • Description
        • Example
        • How it works
        • Note
        • XY Limit
        • XZ Limit
        • YZ Limit
      • Tool clearance
    • Surface paths
      • Pattern
      • Machining direction
      • Geometry
  • Calculation based on Rotary Machining
    • Feeds
      • Feed rate control
        • Use rapid feed rate
      • Feed rate for links
        • Area links
        • Links between regions
        • Links between slices
    • Surface Paths
      • VoluMill Settings
      • Axis offset
      • Sorting
      • Depth Steps
      • Stepover
      • Smoothing
      • Corner pegs
    • Part definition
      • Machining surfaces
      • Axis of rotation
      • Cone angle
      • Machining area
      • Stock definition
      • Filtering
      • Containment
      • Surface quality
    • Link
      • Approach moves
      • Fallback mechanism
      • Lead In-Out
    • Clearance
    • Utility page
      • Tool inspect/change interval
        • Description
        • Distance
        • Number of tools
        • Time
  • Calculation based on Saw Machining
    • Feeds
    • Surface paths
      • Machining type - Circular saw machining
      • Area
      • Pattern
      • Multiple cuts
      • Cut options
      • Surface quality
    • Part definition
  • Calculation based on Surfaces
    • Surface paths
      • Area
        • 2D Containment
        • Angle Range
        • Extend/trim
        • Round corners
        • Type
          • Determined by number of cuts
          • Full, avoid cuts at exact edges
          • Full, start and end at exact surface edge
          • Limit cuts by one or two points
          • Margins
      • Pattern
        • Drive Surface Offset
        • Drive Surfaces
        • Pattern Types
          • Advanced Options
            • Advanced options for morph between 2 surfaces
            • Advanced options for parallel to surface
          • Cuts along curve
          • Flowline
          • Morph between two curves
          • Morph between two surfaces
          • Parallel cuts
          • Parallel to multiple curves
          • Parallel to surface
          • Project curve
      • Sorting
        • Cut order
        • Cutting Method
        • Direction for one way machining
        • Flip Step Over
        • Lanes/Regions
        • Start point
      • Step Over
        • Cusp Height
        • Maximum Step over
      • Surface Quality
        • Cut tolerance
        • Surface edge handling
        • Advanced
          • Point distribution
          • Tool path smoothing
    • Gouge check
      • Check Geometries
      • Check tool parts
      • Remaining Collisions
      • Strategies
        • Advanced options for gouge check
        • Report Collisions
        • Retract tool
          • Retract Advanced Options
          • Retract Along Surface Normal
          • Retract Along To Cut Center
          • Retract Along Tool Axis
          • Retract Along Tool Contact Line
          • Retract Along Tool Plane
          • Retract Along X, Y and Z direction
          • Retract Away From Origin
        • Stop Toolpath Calculation
        • Tilt tool
          • Changed fixed tilt angle
          • Clearance angle
          • Smoothing advanced options
          • Tilt Automatic
          • Use lead lag angle / side tilt angle
        • Trim and Relink
      • Tool Clearance
    • Tool axis control
      • Common direction
      • Limit by axis angle range
      • Maximum angle step
      • Output format
      • Run tool
        • Run tool at user given point
      • Tilting strategies
        • Tool axis will be tilted around axis
        • Tool axis will be tilted from curve away
          • Advanced options
          • Curve tilt type
            • Angle from curve
            • Angle from spindle, main direction
            • Closest point
            • From start to end
            • From start to end for each contour
        • Tool axis will be tilted from point away
        • Tool axis will be tilted into plane
        • Tool axis will be tilted relative to contact point
        • Tool axis will be tilted relative to cutting direction
          • Advanced options
            • Align tool to planar surface eges
            • Allow flipping side direction
            • Gradual lead angle change
            • Gradual side tilt angle change
            • Ruled surface radius limit
            • Side tilt fanning distance
          • Set side tilt by
          • Side tilt definition
            • Follow surface ISO parametric direction
            • Ortho to cut direction at each contour
            • Ortho to cut direction at each position
            • Ortho to lower edge curve
            • Use spindle main direction
            • Use tilt lines
            • Use user defined direction
        • Tool axis will be tilted relative to machining layer
        • Tool axis will be tilted through curve
          • Curve tilt type
            • Angle from curve
            • Angle from spindle, main direction
            • Automatic curve
            • Closest point
            • From start to end
            • From start to end for each contour
          • Tilt relative to cutting direction
        • Tool axis will be tilted through lines
        • Tool axis will be tilted through point
        • Tool axis will be tilted with an angle
        • Tool axis will be tilted with fixed angle to axis
        • Tool axis will be tilted with fixed angle to surface normal
    • Roughing
      • Area Roughing
      • Depth cuts
      • Mirror
      • Morph pocket
      • Multi passes
      • Plunge
      • Sorting options
      • Stock definition
      • Transform - Rotate
    • Utility
      • Axial shift
        • Description
        • Constant for each contour
        • Gradual for all cuts
        • Gradual for each contour
        • Damp
          • How it works - Damp
        • Note
      • Miscellaneous
        • Max. angle step for rotations axis
        • Set Y axis machine limit
        • Smooth surface normals
        • Calculation based on tool center
          • How it works - Calculation based on tool center
      • Tool inspect/change interval
        • Description
        • Distance
        • Number of tools
        • Time
      • Markers
    • Feeds
      • Feed rates
      • Rapid retract
      • Feed rate control
        • Description
        • Surface radius based feed optimization
        • Tool contact based feed rate optimization
        • Feed control zone
        • Use rapid feed rate
        • First cut feed rate percentage
      • Feed rate for links
        • Gaps along cut
        • Links between passes
        • Links between slices
      • Working coordinate system
      • Machining parameters
    • Links
      • Clearance area
        • Additional Parameter
        • Advanced options for clearance area
          • Angle steps for feed movements
          • Angle steps for rapid movements
            • Exact angle step
          • Keep initial orientation until distance
          • Virtual fixture plane
        • Clearance area
          • Automatic
          • Cylinder
          • Plane
          • Sphere
          • Surfaces
        • Incremental clearance plane
        • Tool Orientation
      • Entry/Exit
        • Custom approach/retract link
        • Home position
        • Retract to clearance area through tube center
      • Gaps along cut
        • Blend spline
        • Clearance blend spline
        • Direct
        • Follow stock
        • Follow surfaces
        • Retract to clearance area
        • Retract to feed distance
        • Retract to incremental clearance plane
        • Retract to rapid distance
        • Step
      • Lead-In/Out
        • Flip
        • Leads options
          • Additional lead parameters
          • Lead type line
          • Auto arc sweep
          • Feed rate
          • Fillet
          • Lead type arc
        • Tool axis orientation
          • Fixed
          • Tangential
            • Maximum lead angle change
          • Tilted
          • User defined direction
        • Type
          • Along tool axis
          • Automatic arc
            • Align towards previous - next cut
            • Automatic tilted automatic arc
          • Fade
          • Horizontal tangential arc
          • Orthogonal arc
          • Orthogonal line
          • Position line
          • Reverse orthogonal line
          • Reverse tangential arc
          • Reverse Tangential line
          • Reverse vertical profile ramp
          • Reverse vertical tangential arc
          • Tangential arc
          • Tangential Line
          • Vertical profile ramp
          • Vertical tangential arc
      • Links between passes
        • Blend spline
        • Clearance blend spline
        • Direct
        • Follow stock
        • Follow surfaces
        • Retract to clearance area
        • Retract to feed distance
        • Retract to incremental clearance plane
        • Retract to rapid distance
        • Step
      • Links between slice
        • Blend spline
        • Clearance blend spline
        • Retract to rapid distance
        • Direct
        • Follow stock
        • Follow surfaces
        • Retract to clearance area
        • Retract to feed distance
        • Retract to incremental clearance plane
        • Step
      • Retract Distances
        • Distances
          • Air move safety distance
          • Automatic
          • Entry/Exit feed distance
          • Feed distance
          • Rapid distance
          • Rapid distance in tool plane
            • Plane angle
          • Z-Height
      • Round corners
        • Between approach/retract and link
  • Calculation based on SWARF Machining
    • Feeds
      • Feed rate control
        • Adjust feed rates on edges
        • Adjust feed rates for cutting depth
        • Adjust feed rates for fanning
        • Description
        • Maximum feed rate
        • Minimum feed rate
        • Use rapid feed rate
    • Surface Paths
      • Geometry selection
      • Machining
      • Swarf advanced control
      • Swarf extensions
      • Swarf start point
      • Swarf surface quality
    • Corners
      • Inside corners
      • Outside corners
    • Gouge check
      • Avoid by relinking
      • Avoid by retracting
      • Clearances
      • Gouge&Excess
    • Multi cuts
      • Mirror
      • Pattern slices
      • Pattern layers
      • Swarf Sorting
      • Tool guidance
      • Transform Rotate
    • Tool axis control
    • Utility
      • Markers
      • Miscellaneous
      • Tool inspect/change interval
        • Description
        • Distance
        • Time
        • Number of tools
    • Link
      • Entry - Exit
        • Home Position
        • Retract to clearance area through tube center
      • Gaps along cut
        • Direct
        • Follow surfaces
        • Blend Spline
        • Step
        • Retract to feed distance
        • Retract to rapid distance
        • Retract to clearance area
        • Retract to incremental clearance plane
        • Clearance blend spline
      • Links between slices
        • Direct
        • Follow surfaces
        • Blend spline
        • Step
        • Retract to feed distance
        • Retract to rapid distance
        • Retract to clearance area
        • Retract to incremental clearance plane
        • Clearance blend spline
      • Links between layer
        • Direct
        • Follow surfaces
        • Blend spline
        • Step
        • Retract to feed distance
        • Retract to rapid distance
        • Retract to clearance area
        • Retract to incremental clearance plane
        • Clearance blend spline
      • Links between regions
        • Direct
        • Follow surfaces
        • Blend spline
        • Retract to feed distance
        • Retract to rapid distance
        • Retract to clearance area
        • Retract to incremental clearance plane
        • Clearance blend spline
      • Clearance area
        • Clearance area
          • Automatic
          • Plane
          • Cylinder
          • Sphere
          • Surfaces
          • Tool orientation
          • Don't exceed clearance area
        • Incremental clearance plane
        • Advanced options for clearance area
          • Virtual fixture plane
          • Connection along tool axis
          • Keep initial orientation until distance
          • Angle step for rapid moves
            • Exact angle step
          • Angle step for feed moves
      • Retract distances
        • Distances
          • Air move safety distance
          • Entry/Exit feed distance
          • Rapid distance
          • Rapid distance in tool plane
            • Plane angle
      • Round corners
        • Between approach/retract and link
      • Default Lead In/Out
        • Flip
        • Leads options
          • Height
          • Auto arc sweep
          • Feed rate
          • Fillet
          • Lead type arc
          • Lead type line
        • Type
          • Tangential arc
          • Reverse tangential arc
          • Vertical tangential arc
          • Reverse vertical tangential arc
          • Horizontal tangential arc
          • Orthogonal arc
          • Tangential Line
          • Reverse Tangential line
          • Orthogonal line
          • Reverse orthogonal line
          • Vertical profile ramp
          • Reverse vertical profile ramp
          • Position line
          • Automatic arc
            • Align towards previous/next cut
            • Automatic tilted automatic arc
          • Along tool axis
          • Fade
        • Tool axis orientation
          • Fixed
          • Normal to lead
          • Tangential
            • Maximum lead angle change
          • Tilted
          • User defined direction
  • Calculation based on Triangle Meshes
    • Rough
      • Feeds
        • Feed rate for links
          • Area links
          • Links between regions
          • Links between slices
        • Feed rate control
          • Feed control zone
          • Radial chip thinning feed control
          • Use rapid feed rate
        • Machining parameters
      • Surface Paths
        • Pattern
          • Advanced depth step
          • DHC
          • Heights
          • Profile pass
        • Area
          • Silhouette Containment
          • 2D Containment
          • Rest rough
          • Draft angle
          • Closed offset
          • Undercuts
          • Fixture curves
          • Filtering
          • Detect thicker than
        • Surface Quality
          • Cut Tolerance
          • Advanced
        • Sorting
          • Reverse cutting order
          • Cutting method
          • Direction for one way machining
          • Intermediate slices
          • Machine by
          • Start point
          • Maintain cutting direction for closed cuts
          • Zigzag threshold
        • Step over
        • Machining direction
          • Multiple direction (3 + 2)
      • Link
        • Entry/Exit
        • Area links
        • Links between slice
        • Link between regions
        • Retracts
          • Home position
          • Clearance area
          • Distances
          • Arc fit
          • Skip default fallback sequence
          • Radial clearance
          • Incremental clearance plane
          • Tool Orientation
          • Virtual fixture plane
        • Links between tool axis orientation change
          • Marker clearance for 3+2
      • Roughing
        • Stock definition
        • Advanced
        • Approach moves
        • Pre-drill
        • Adaptive links
        • Parallel rough links
        • Transform / Rotate
        • Mirror
      • Utility
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
    • SmartRoughing
      • Machine
      • Material
      • SmartRoughing
        • Machining Params
        • Performance
      • Tools
    • Parallel Cuts
      • Surface Paths
        • Pattern
        • Area
          • Trim to flute length
          • Angle Range
          • Silhouette Containment
          • Undercuts
          • Rest finish
          • Round corners
          • Filtering
          • Exclude flat areas
          • Containment
            • 2D
            • 3D
          • Edge Rolling
        • Sorting
          • Cutting method
          • Machine by
          • Start corner
        • Surface Quality
          • Cut Tolerance
          • Advanced
        • Step Over
      • Link
        • Entry/Exit
        • Gaps along cut
        • Links between slice
        • Lead - In/Out
        • Retracts
          • Home position
          • Clearance area
          • Distances
          • Arc fit
          • Incremental clearance plane
          • Tool Orientation
        • Links between passes
      • Roughing
        • Stock definition
        • Multi passes
        • Transform / Rotate
        • Mirror
      • Feeds
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
    • Project Curves
      • Surface Paths
        • Pattern
        • Area
          • Trim to flute length
          • Angle Range
          • Silhouette Containment
          • Rest finish
          • Corner smoothing loop
          • Follow containment
          • Filtering
          • Containment
            • 2D
          • Edge Rolling
        • Surface Quality
          • Cut Tolerance
          • Advanced
        • Step over
        • Sorting
          • Reverse
          • Cutting method
          • Cut order
          • Direction for closed cuts
          • First pass along
          • Start point
      • Link
        • Entry/Exit
        • Gaps along cut
        • Links between slice
        • Lead - In/Out
        • Retracts
          • Home position
          • Clearance area
          • Distances
          • Arc fit
          • Incremental clearance plane
          • Tool Orientation
        • Links between passes
      • Roughing
        • Stock definition
        • Transform / Rotate
        • Mirror
      • Feeds
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
    • Constant Z
      • Surface Paths
        • Pattern
        • Depth step
        • Area
          • Angle Range
          • Silhouette Containment
          • Machine Undercuts
          • Rest finish
          • Round corners
          • Exclude Undercut Areas
          • Edge Rolling
          • Filtering
          • Containment
            • 2D
            • 3D
        • Sorting
          • Cutting method
            • Advanced options for spiral machining
          • Direction for closed cuts
          • Start at
          • Machine by
          • Start point
          • Overlap
          • Maintain cutting direction for closed cuts
          • Zigzag open cuts
        • Surface Quality
          • Cut Tolerance
          • Advanced
      • Link
        • Entry/Exit
        • Gaps along cut
        • Links between slice
        • Lead - In/Out
        • Retracts
          • Home position
          • Clearance area
          • Distances
          • Arc fit
          • Incremental clearance plane
          • Tool Orientation
        • Link between passes
      • Roughing
        • Stock definition
        • Transform / Rotate
        • Mirror
      • Feeds
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
        • Feed rate for links
          • Area links
          • Links between slices
    • Constant Z + Constant Cusp
      • Surface Paths
        • Pattern
          • Machining surfaces
          • Heights
          • DHC
          • Depth step
          • Shallow regions
        • Area
          • Exclude undercut areas
          • Round corners
          • Edge Rolling
          • Exclude flat areas
          • Filtering
          • Rest finishing
          • Silhouette Containment
          • Containment
            • 2D
        • Sorting
          • Cutting method
            • Blend Along Distance
          • Start at
          • Machine by
          • Start point
          • Overlap
        • Surface quality
          • Cut tolerance
          • Advanced
        • Stepover
      • Link
        • Entry/Exit
        • Gaps along cut
        • Links between slice
        • Lead - In/Out
        • Retracts
          • Home position
          • Clearance area
          • Distances
          • Arc fit
          • Incremental clearance plane
          • Tool Orientation
        • Links between passes
      • Roughing
        • Stock definition
        • Transform / Rotate
        • Mirror
      • Feeds
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
    • Constant Z + Parallel Cuts
      • Surface Paths
        • Pattern
          • Machining surfaces
          • Heights
          • DHC
          • Depth step
          • Shallow regions
        • Area
          • Exclude undercut areas
          • Round corners
          • Edge Rolling
          • Exclude flat areas
          • Filtering
          • Rest finishing
          • Silhouette Containment
          • Containment
            • 2D
        • Sorting
          • Cutting method
            • Blend Along Distance
          • Start at
          • Machine by
          • Start point
          • Overlap
        • Surface quality
          • Cut tolerance
          • Advanced
        • Stepover
      • Link
        • Entry/Exit
        • Gaps along cut
        • Links between slice
        • Lead - In/Out
        • Retracts
          • Home position
          • Clearance area
          • Distances
          • Arc fit
          • Incremental clearance plane
          • Tool Orientation
        • Links between passes
      • Roughing
        • Stock definition
        • Transform / Rotate
        • Mirror
      • Feeds
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
    • Constant Cusp
      • Surface Paths
        • Pattern
        • Area
          • Round corners
          • Exclude undercut areas
          • Undercuts
          • Silhouette Containment
          • Angle Range
          • Rest finish
          • Filtering
          • Exclude flat areas
          • Containment
            • 2D
            • 3D
          • Edge Rolling
        • Sorting
          • Flip step over
          • Cutting method
          • Cut order
          • Direction for closed cuts
          • Start point
          • Overlap
          • Advanced
        • Surface Quality
          • Cut Tolerance
          • Advanced
        • Step Over
      • Link
        • Entry/Exit
        • Gaps along cut
        • Links between slice
        • Lead - In/Out
        • Retracts
          • Home position
          • Clearance area
          • Distances
          • Arc fit
          • Incremental clearance plane
          • Tool Orientation
        • Link between passes
      • Roughing
        • Stock definition
        • Transform / Rotate
        • Mirror
      • Feeds
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
    • Flatlands
      • Surface Paths
        • Pattern
        • Area
          • Undercuts
          • Filtering
          • Maximum/minimum width
          • Containment
            • 2D
        • Sorting
          • Reverse Cutting Order
          • Cutting method
          • Direction for closed cuts
        • Surface Quality
          • Cut Tolerance
          • Advanced
          • Flat tolerance factor
        • Multiple direction (3+2)
      • Link
        • Entry/Exit
        • Area Links
        • Links between regions
        • Lead - In/Out
        • Retracts
          • Home position
          • Clearance area
          • Distances
          • Arc fit
          • Incremental clearance plane
          • Tool Orientation
      • Roughing
        • Advanced
        • Adaptive links
        • Transform / Rotate
        • Mirror
      • Feeds
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
    • Pencil
      • Surface Paths
        • Pattern
        • Area
          • Silhouette Containment
          • Angle Range
          • Filtering
          • Containment
            • 2D
        • Sorting
          • Cut order
          • Cutting method
          • Direction for one way machining
          • Start point
        • Surface Quality
          • Cut Tolerance
          • Corner detection threshold
          • Advanced
          • Over Thickness
      • Link
        • Entry/Exit
        • Gaps along cut
        • Links between slice
        • Lead - In/Out
        • Retracts
          • Home position
          • Clearance area
          • Distances
          • Arc fit
          • Incremental clearance plane
          • Tool Orientation
        • Links between passes
      • Roughing
        • Stock definition
        • Transform / Rotate
        • Mirror
      • Feeds
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
    • Geodesic
      • Surface Paths
        • Pattern
        • Area
          • Silhouette Containment
          • User defined containment
        • Sorting
          • Cut order
          • Cutting Method
          • Direction for one way machining
          • Flip Step Over
          • Machine by
          • Start point
        • Surface Quality
          • Cut Tolerance
          • Advanced
      • Link
        • Entry/Exit
        • Gaps along cut
        • Links between slice
        • Lead - In/Out
        • Retracts
          • Home position
          • Clearance area
          • Distances
          • Arc fit
      • Roughing
        • Stock definition
        • Depth Cuts
        • Transform / Rotate
        • Sorting
    • Projection
      • Surface Paths
        • Pattern
        • Area
          • Line start point
          • Start / End height along line
          • Start / End angle
          • Step angle
        • Sorting
          • Cutting method
          • Cut order
          • Direction for one way machining
          • Start point
        • Surface Quality
          • Cut Tolerance
          • Advanced
        • Step over
      • Link
        • Entry/Exit
        • Gaps along cut
        • Links between slice
        • Lead - In/Out
        • Retracts
          • Home position
          • Clearance area
          • Distances
          • Arc fit
          • Incremental clearance plane
          • Tool Orientation
      • Roughing
        • Stock definition
        • Multi passes
        • Transform / Rotate
        • Mirror
      • Feeds
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
    • Rotary
      • Feeds
        • Feed rate control
          • Feed control zone
          • Use rapid feed rate
      • Surface Paths
        • Pattern
        • Area
          • Start/end angle
          • Step angle
        • Sorting
          • Cutting method
          • Direction for closed cuts
          • Start point
        • Surface Quality
          • Cut Tolerance
          • Advanced
        • Step Over
      • Link
        • Entry/Exit
        • Gaps along cut
        • Link between slice
        • Lead - In/Out
        • Retracts
          • Home position
          • Clearance area
          • Distances
          • Arc fit
      • Roughing
        • Stock definition
        • Multi passes
        • Transform / Rotate
        • Mirror
      • Utility
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
    • Trochoidal
      • Feeds
        • Feed rate control
          • Feed control zone
          • Use rapid feed rate
      • Surface Paths
        • Pattern
        • Area
          • Extension
          • Arc radius
          • Arc sweep angle
        • Sorting
          • Machining direction
          • Start point
        • Surface quality
          • Advanced
          • Cut tolerance
        • Step over
      • Link
        • Entry/Exit
        • Retracts
          • Home position
          • Clearance area
          • Distances
          • Arc fit
          • Incremental clearance plane
          • Tool Orientation
      • Roughing
        • Transform / Rotate
        • Mirror
    • Tool axis control
      • Common direction
      • Limit by axis angle range
      • Maximum angle step
      • Output format
      • Tilting strategies
        • Tool axis will be rotated around axis
        • Tool axis will be tilted from curve away
          • Advanced options
          • Curve tilt type
            • Angle from curve
            • Angle from spindle, main direction
            • Closest point
            • From start to end
            • From start to end for each contour
        • Tool axis will be tilted from point away
        • Tool axis will be tilted into plane
        • Tool axis will be tilted relative to cutting direction
          • Advanced options
          • Side tilt by
          • Side tilt definition
        • Tool axis will be tilted relative to machining layer
        • Tool axis will be tilted through curve
          • Curve tilt type
          • Tilt relative to cutting direction
        • Tool axis will be tilted through lines
        • Tool axis will be tilted through point
        • Tool axis will be tilted with an angle
        • Tool axis will be tilted with fixed angle to axis
    • Gouge check
      • Check Geometries
      • Check tool parts
      • Remaining Collisions
      • Strategies
        • Advanced options for gouge check
        • Report Collisions
        • Retract tool
          • Retract Advanced Options
          • Retract Along Surface Normal
          • Retract Along To Cut Center
          • Retract Along Tool Axis
          • Retract Along Tool Contact Line
          • Retract Along Tool Plane
          • Retract Along X, Y and Z direction
          • Retract Away From Origin
        • Stop Toolpath Calculation
        • Tilt tool
          • Changed fixed tilt angle
          • Clearance angle
          • Smoothing advanced options
          • Tilt Automatic
          • Use lead lag angle / side tilt angle
        • Trim and Relink
      • Tool Clearance
    • Utility
      • Axial shift
      • Miscellaneous
      • Tool inspect/change interval
        • Description
        • Distance
        • Number of tools
        • Time
    • Corner Finishing
      • Feeds
      • Link
        • Clearance area
        • Entry/Exit
        • Gaps along cut
        • Lead - In/Out
        • Link between slice
        • Links between passes
        • Retract distances
        • Round Corners
      • Roughing
        • Mirror
        • Transform / Rotate
      • Surface Paths
        • Area
          • Containment
            • 2D
          • Rest Finishing
          • Silhouette containment
        • Pattern
          • Depth step
          • DHC
          • Heights
          • Machining Surfaces
          • Type
        • Sorting
          • Cutting method
        • Stepover
        • Surface quality
          • Advanced
          • Cut tolerance
    • Morph between Curves
      • Feeds
      • Link
        • Clearance area
        • Entry/Exit
        • Gaps along cut
        • Lead - In/Out
        • Link between slice
        • Links between passes
        • Retract distances
        • Round Corners
      • Roughing
        • Mirror
        • Transform / Rotate
      • Surface Paths
        • Area
          • Angle range
          • Containment
          • Filtering
          • Rest finishing
          • Silhouette containment
          • Trim to flute length
        • Pattern
          • Across guide curves
          • DHC
          • Extend guide curves
          • Guide curves
          • Heights
          • Machining surfaces
          • Type
        • Sorting
          • Cutting method
          • Start corner
        • Stepover
          • Cusp height
          • Maximum stepover
        • Surface quality
          • Advanced
          • Cut tolerance
  • Calculation based on Triangle Meshes HSM
    • Parallel Cuts
      • Surface Paths
        • Pattern
        • Area
          • Round corners
          • 2D Containment
          • Silhouette Containment
          • Rest finish
          • Angle Range
          • Filtering
        • Sorting
          • Cutting method
          • Start point
        • Step Over
        • Surface quality
          • Advanced
          • Cut Tolerance
      • Link
      • Gouge check
        • Check Geometries
        • Check tool parts
        • Remaining Collisions
        • Strategies
          • Advanced options for gouge check
          • Report Collisions
          • Retract tool
            • Retract Advanced Options
            • Retract Along Surface Normal
            • Retract Along To Cut Center
            • Retract Along Tool Axis
            • Retract Along Tool Contact Line
            • Retract Along Tool Plane
            • Retract Along X, Y and Z direction
            • Retract Away From Origin
          • Stop Toolpath Calculation
          • Tilt tool
            • Changed fixed tilt angle
            • Clearance angle
            • Smoothing advanced options
            • Tilt Automatic
            • Use lead lag angle / side tilt angle
          • Trim and Relink
        • Tool Clearance
    • Constant Z
      • Surface Paths
        • Pattern
        • Depth step
        • Area
          • Round and Sharp corners
          • 2D Containment
          • Rest finish
          • Angle Range
          • Silhouette Containment
          • Filtering
        • Sorting
          • Cutting method
          • Direction of one way machining
          • Start at
          • Machine by
        • Surface quality
          • Advanced
          • Cut Tolerance
      • Link
      • Gouge check
        • Check Geometries
        • Check tool parts
        • Remaining Collisions
        • Strategies
          • Advanced options for gouge check
          • Report Collisions
          • Retract tool
            • Retract Advanced Options
            • Retract Along Surface Normal
            • Retract Along To Cut Center
            • Retract Along Tool Axis
            • Retract Along Tool Contact Line
            • Retract Along Tool Plane
            • Retract Along X, Y and Z direction
            • Retract Away From Origin
          • Stop Toolpath Calculation
          • Tilt tool
            • Changed fixed tilt angle
            • Clearance angle
            • Smoothing advanced options
            • Tilt Automatic
            • Use lead lag angle / side tilt angle
          • Trim and Relink
        • Tool Clearance
    • Constant Cusp
      • Surface Paths
        • Pattern
        • Area
          • Round corners
          • 2D Containment
          • Rest finish
          • Angle Range
          • Silhouette Containment
          • Filtering
        • Sorting
          • Cutting method
          • Cut order
        • Step Over
        • Surface quality
          • Advanced
          • Cut Tolerance
      • Link
      • Feeds
      • Gouge check
        • Check Geometries
        • Check tool parts
        • Remaining Collisions
        • Strategies
          • Advanced options for gouge check
          • Report Collisions
          • Retract tool
            • Retract Advanced Options
            • Retract Along Surface Normal
            • Retract Along To Cut Center
            • Retract Along Tool Axis
            • Retract Along Tool Contact Line
            • Retract Along Tool Plane
            • Retract Along X, Y and Z direction
            • Retract Away From Origin
          • Stop Toolpath Calculation
          • Tilt tool
            • Changed fixed tilt angle
            • Clearance angle
            • Smoothing advanced options
            • Tilt Automatic
            • Use lead lag angle / side tilt angle
          • Trim and Relink
        • Tool Clearance
    • Constant Z + Constant Cusp
      • Surface Paths
        • Pattern
          • Depth step
        • Area
          • 2D Containment
          • Angle Range
          • Filtering
          • Rest finishing
          • Round and sharp corners
          • Silhouette Containment
        • Sorting
          • Cutting method
          • Direction for one way machining
          • Machine by
          • Start at
        • Step Over
        • Surface quality
          • Advanced
          • Cut Tolerance
      • Gouge check
        • Check Geometries
        • Check tool parts
        • Remaining Collisions
        • Strategies
          • Advanced
          • Report Collisions
          • Retract tool
            • Retract Advanced Options
            • Retract Along Surface Normal
            • Retract Along To Cut Center
            • Retract Along Tool Axis
            • Retract Along Tool Contact Line
            • Retract Along Tool Plane
            • Retract Along X, Y and Z direction
            • Retract Away From Origin
          • Stop Toolpath Calculation
          • Tilt tool
            • Changed fixed tilt angle
            • Clearance angle
            • Smoothing advanced options
            • Tilt Automatic
            • Use lead lag angle / side tilt angle
          • Trim and Relink
        • Tool Clearance
      • Link
    • Constant Z + Parallel Cuts
      • Surface Paths
        • Pattern
          • Depth step
        • Area
          • 2D Containment
          • Angle Range
          • Filtering
          • Rest finishing
          • Round and sharp corners
          • Silhouette Containment
        • Sorting
          • Cutting method
          • Direction for one way machining
          • Machine by
          • Start at
        • Step over
        • Surface quality
          • Advanced
          • Cut Tolerance
      • Gouge check
        • Check Geometries
        • Check tool parts
        • Remaining Collisions
        • Strategies
          • Advanced
          • Report Collisions
          • Retract tool
            • Retract Advanced Options
            • Retract Along Surface Normal
            • Retract Along To Cut Center
            • Retract Along Tool Axis
            • Retract Along Tool Contact Line
            • Retract Along Tool Plane
            • Retract Along X, Y and Z direction
            • Retract Away From Origin
          • Stop Toolpath Calculation
          • Tilt tool
            • Changed fixed tilt angle
            • Clearance angle
            • Smoothing advanced options
            • Tilt Automatic
            • Use lead lag angle / side tilt angle
          • Trim and Relink
        • Tool Clearance
      • Link
    • Utility
  • Calculation based on Turning
    • Tools
    • Feeds page
    • Face
      • Surface Paths
      • Links
    • Rough
      • Surface Paths
        • Advanced options for Adaptive Roughing
        • Area
          • 2D Containment
          • Extend profile to stock
          • Follow tool angle
          • Sharp corners
        • Detect material
      • Links
      • Gouge Check
      • Utility
    • Groove
      • Surface Paths
      • Links
    • Form Groove
      • Surface Paths
      • Links
    • Profile
      • Surface Paths
        • Area
          • 2D Containment
          • Follow tool angle
      • Links
    • B-Axis Profile
      • Surfaces paths
        • Area
          • 2D Containment
      • Links
      • Tool axis control
    • Threading
      • Surface Paths
      • Links
      • Shape/cut
    • Cut Off
      • Surface Paths
      • Links
    • High Dynamic Turning
      • Feeds
      • Links
      • Surface Path
        • Area
          • 2D Containment
          • Follow tool angle
  • Calculation based on Turn Milling
    • Feeds
    • Surface paths
      • Process type
      • Sorting
      • Depth steps
      • Stepover
      • Axis offset
      • Non-cutting parameter
        • Behavior of the orthogonal links
        • Behavior of the tangential links
    • Part definition
      • Machining surface
        • Part definition
      • Axis of rotation
      • Machining area
      • Stock defintion
      • Eccentric machining
      • Surface quality
    • Clearance
  • Calculation based on Wireframe
    • 5-Axis profiling
      • Feeds
        • Feed rates
        • Rapid retract
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
          • First cut feed rate percentage
        • Working coordinate system
        • Machining parameters
      • Gouge Check
        • Advanced options for gouge check
        • Check Geometries
        • Check tool parts
        • Remaining Collisions
        • Strategy and parameters
          • Report Collisions
          • Retract tool
            • Advanced options
            • Retract Advanced Options
            • Retract Along Surface Normal
            • Retract Along To Cut Center
            • Retract Along Tool Axis
            • Retract Along Tool Contact Line
            • Retract Along Tool Plane
            • Retract Along X, Y and Z direction
            • Retract Away From Origin
          • Stop Toolpath Calculation
          • Tilt tool
            • Automatic
            • Changed fixed tilt angle
            • Clearance angle
            • Smoothing advanced options
            • Use lead lag angle / side tilt angle
          • Trim and Relink
        • Clearance for tool parts
      • Link
        • Clearance area
          • Advanced options for clearance area
            • Angle steps for feed movements
            • Angle steps for rapid movements
              • Exact angle step
            • Connection along tool axis
            • Keep initial orientation until distance
            • Virtual fixture plane
          • Clearance area
            • Automatic
            • Cylinder
            • Plane
            • Sphere
            • Surfaces
          • Incremental clearance plane
          • Tool Orientation
        • Entry/Exit
          • Custom approach/retract link
          • Home position
            • Start from home position - Return to home position
          • Retract to clearance area through tube center
        • Gaps along cut
          • Blend spline
          • Clearance blend spline
          • Direct
          • Follow stock
          • Follow surfaces
          • Retract to clearance area
          • Retract to feed distance
          • Retract to incremental clearance plane
          • Retract to rapid distance
          • Step
        • Lead-In/Out
          • Flip
          • Leads options
            • Additional lead parameters
            • Auto arc sweep
            • Feed rate
            • Fillet
            • Lead type arc
            • Lead type line
          • Tool axis orientation
            • Fixed
            • Tangential
              • Maximum lead angle change
            • Tilted
            • User defined direction
          • Type
            • Along tool axis
            • Automatic arc
              • Align towards previous/next cut
              • Automatic tilted automatic arc
            • Fade
            • Horizontal tangential arc
            • Maximum lead angle change
            • Normal to lead
            • Orthogonal arc
            • Orthogonal line
            • Orthogonal to cut direction
            • Position line
            • Reverse orthogonal line
            • Reverse tangential arc
            • Reverse vertical profile ramp
            • Reverse vertical tangential arc
            • Slant line
            • Tangential arc
            • Tangential Line
            • Vertical profile ramp
            • Vertical tangential arc
        • Links between passes
          • Blend spline
          • Clearance blend spline
          • Direct
          • Follow stock
          • Follow surfaces
          • Retract to clearance area
          • Retract to feed distance
          • Retract to incremental clearance plane
          • Retract to rapid distance
          • Step
        • Links between slice
          • Blend spline
          • Clearance blend spline
          • Direct
          • Follow stock
          • Follow surfaces
          • Retract to clearance area
          • Retract to feed distance
          • Retract to incremental clearance plane
          • Retract to rapid distance
          • Step
        • Retract distances
          • Distances
            • Air move safety distance
            • Entry/Exit feed distance
            • Feed distance
            • Rapid distance
            • Rapid distance in tool plane
              • Plane angle
        • Round corners
          • Between approach/retract and link
      • Surface Paths
        • Area
          • 2D Containment
          • Extend/trim
          • Round corners
        • Sorting
          • Direction for one way machining
          • Start point
        • Surface Quality
      • Tool Axis Control
        • Common direction
        • Limit by axis angle range
        • Maximum angle step
        • Output format
        • Run Tool
        • Tilting strategies
          • Tool axis will be tilted from curve away
            • Curve tilt type
              • Angle from curve
              • Angle from spindle, main direction
              • Closest point
              • From start to end
              • From start to end for each contour
          • Tool axis will be tilted from point away
          • Tool axis will be tilted into plane
          • Tool axis will be tilted relative to cutting direction
            • Set side tilt by
          • Tool axis will be tilted through curve
            • Curve tilt type
              • Angle from curve
              • Angle from spindle, main direction
              • Automatic curve
              • Closest point
              • From start to end
              • From start to end for each contour
          • Tool axis will be tilted through lines
          • Tool axis will be tilted through point
          • Tool axis will be tilted with fixed angle to surface normal
          • Tool axis will be tilted with fixed angle to axis
      • Utility
        • Axial shift
          • Description
          • Constant for each contour
          • Damp
            • How it works - Damp
          • Note
        • Miscellaneous
          • Max. angle step for rotations axis
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
        • Markers
    • 3-Axis Profile
      • Surface paths
        • Pattern
        • Area
          • 2D Containment
          • Extend/Trim
        • Sorting
          • Direction for one way machining
          • Start point
        • Surface quality
      • Link
        • Entry/Exit
        • Gaps along curt
        • Links between slice
        • Lead - In/Out
        • Retracts
          • Clearance area
          • Distances
          • Arc fit
          • Tool Orientation
      • Roughing
        • Multi passes
        • Transform / Rotate
        • Mirror
      • Tool axis Control
        • Common direction
        • Tool axis will be tilted into plane
      • Utility
        • Axial Shift
        • Markers
        • Miscellaneous
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
    • 2-Axis Rough
      • Feeds
        • Feed rate control
        • Feed rate for links
      • Surface Paths
        • Pattern
        • Area
          • Overhang
          • Closed offset
          • Draft angle
          • Rest roughing
          • 2d Containment
          • Fixture curves
          • Remove stock pillars
          • Sharp Corners
        • Sorting
          • Reverse cutting order
          • Cutting method
          • Direction for one way machining
          • Machine by
          • Start point
          • Zigzag threshold
        • Surface quality
          • Cut tolerance
          • Advanced
        • Step Over
      • Link
        • Entry/Exit
        • Area links
        • Links between slice
        • Link between regions
        • Retracts
          • Clearance area
          • Distances
          • Arc fit
          • Skip default fallback sequence
          • Radial clearance
          • Tool Orientation
      • Roughing
        • Stock definition
        • Advanced
        • Approach moves
        • Pre-drill
        • Adaptive links
        • Parallel rough links
        • Transform / Rotate
        • Mirror
      • Utility
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
    • 2-Axis Profile
      • Surface Paths
        • Pattern
        • Area
          • Sharp corners
          • Rest finishing
          • Draft angle
          • 2D Containment
          • Tabs
          • Extend/Trim
        • Sorting
          • Cutting method
          • Advanced options for spiral machining
          • Direction for closed cuts
          • Start at
          • Machine by
          • Start from
          • Overlap
        • Surface quality
          • Cut tolerance
          • Advanced
      • Link
        • Entry/Exit
        • Gaps along cut
        • Links between slice
        • Lead - In/Out
        • Retracts
          • Clearance area
          • Distances
          • Arc fit
          • Tool Orientation
      • Roughing
        • Stock definition
        • Multi passes
        • Transform / Rotate
        • Mirror
      • Utility
        • Markers
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
      • Feeds
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
    • 2-Axis Floor Finishing
      • Surface paths
        • Pattern
        • Sorting
          • Cutting method
          • Direction for one way machining
          • Reverse cutting order
        • Area
          • 2d Containment
        • Surface quality
          • Advanced
          • Cut Tolerance
        • Step over
      • Link
        • Entry/Exit
        • Area links
        • Links between regions
        • Retracts
          • Arc fit
          • Clearance area
          • Distances
          • Tool Orientation
        • Default Lead-In/Out
      • Roughing
        • Advanced
        • Transform / Rotate
        • Mirror
      • Utility
        • Markers
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
      • Feeds
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
        • Feed rate for links
          • Area links
          • Links between regions
          • Links between slices
    • 2-Axis Contouring
      • Surface paths
        • Pattern
        • Area
          • Sharp corners
        • Surface quality
          • Cut tolerance
      • Link
        • Entry/Exit
        • Area links
        • Link between regions
        • Retracts
          • Clearance area
          • Distances
          • Arc fit
          • Tool Orientation
        • Lead - In/Out
      • Roughing
        • Transform / Rotate
        • Mirror
      • Utility
        • Markers
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
      • Feeds
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
    • Engrave
      • Surface paths
        • Pattern
        • Area
        • Sorting
          • Cutting method
          • Direction for closed cuts
          • Start from
          • Start from corner
          • Start points
          • Sorting
        • Surface quality
        • Step over
      • Link
        • Entry/Exit
        • Area links
        • Links between slice
        • Link between regions
        • Lead - In/Out
        • Retracts
          • Clearance Area
          • Distances
          • Arc fit
          • Tool Orientation
      • Roughing
        • Transform / Rotate
        • Mirror
      • Utility
        • Markers
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
      • Feeds
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
    • 2-Axis Chamfer
      • Surface paths
        • Pattern
        • Area
          • Sharp corners
          • 2D Containment
          • Extend/Trim
        • Sorting
          • Direction for one way machining
          • Overlap
          • Start from
        • Surface quality
          • Cutting tolerance
          • Advanced
      • Link
        • Entry/Exit
        • Gaps along cut
        • Links between slice
        • Lead - In/Out
        • Retracts
          • Clearance area
          • Distances
          • Arc fit
          • Tool Orientation
      • Utility
        • Axial Shift
        • Markers
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
    • Face
      • Surface Paths
        • Pattern
        • Area
        • Sorting
          • Cutting method
          • Direction for one way machining
          • Start corner
        • Surface quality
        • Step over
      • Link
        • Entry/Exit
        • Links between passes
        • Links between regions
        • Lead In/Out
        • Retracts
          • Clearance Area
          • Distances
          • Arc fit
          • Tool Orientation
      • Roughing
        • Transform / Rotate
      • Utility
        • Markers
      • Feeds
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
    • Trochoidal
      • Surface Paths
        • Pattern
        • Sorting
          • Machining direction
          • Machine by
        • Step over
        • Surface quality
          • Advanced
          • Cut tolerance
      • Link
        • Entry/Exit
        • Links between passes
        • Links between slice
        • Retracts
          • Clearance area
          • Distances
          • Arc fit
          • Tool Orientation
      • Roughing
        • Approach moves
        • Transform / Rotate
        • Mirror
      • Utility
        • Markers
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
      • Feeds
        • Feed rate control
    • Extrude
      • Surface Paths
        • Sorting
          • Cut order
          • Cutting Method
          • Direction for one way machining
        • Stepover
        • Surface Quality
      • Tool axis control
      • Gouge Check
      • Links
        • First entry/Last exit
          • Between slices
            • Blend spline
            • Direct
            • Follow surfaces
            • Retract to clearance area
            • Retract to feed distance
            • Retract to rapid distance
            • Step
          • Retract to clearance area through tube center
        • Lead - In/Out
        • Retracts
          • Arc fit
          • Clearance area
            • Additional parameter
            • Advanced options for clearance area
              • Angle steps for feed movements
              • Angle steps for rapid movements
                • Exact angle step
              • Keep initial orientation until distance
              • Virtual fixture plane
            • Clearance area
              • Cylinder
              • Plane
              • Sphere
              • Surfaces
            • Incremental clearance plane
            • Tool orientation
          • Distances
          • Tool Orientation
      • Utility
        • Axial shift
          • Description
          • Constant for each contour
          • Gradual for all cuts
          • Gradual for each contour
          • Damp
            • How it works - Damp
          • Note
        • Miscellaneous
          • Set Y axis machine limit
          • Smooth surface normals
          • Calculation based on tool center
            • How it works - Calculation based on tool center
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
      • Feeds
        • Feed rates
        • Rapid retract
        • Working coordinate system
        • Machining parameters
    • Text Engrave
      • Feeds
        • Feed rate control
          • Description
          • Feed control zone
          • Use rapid feed rate
      • Surface paths
        • Pattern
        • Sorting
          • Machine by
        • Surface quality
      • Link
        • Entry/Exit
        • Area links
        • Links between slice
        • Link between regions
        • Lead In/Out
        • Retracts
          • Clearance area
          • Distances
          • Arc fit
          • Tool Orientation
      • Roughing
        • Transform / Rotate
        • Mirror
      • Utility
        • Markers
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
    • 6-Axis Profiling
      • Feeds
        • Feed rates
        • Rapid retract
        • Feed rate control
          • Description
          • Use rapid feed rate
          • First cut feed rate percentage
        • Working coordinate system
        • Machining parameters
      • Gouge check
        • Advanced options for gouge check
        • Check Geometries
        • Check tool parts
        • Remaining Collisions
        • Strategies
          • Advanced options for gouge check
          • Report Collisions
          • Retract tool
            • Retract Advanced Options
            • Retract Along Surface Normal
            • Retract Along To Cut Center
            • Retract Along Tool Axis
            • Retract Along Tool Contact Line
            • Retract Along Tool Plane
            • Retract Along X, Y and Z direction
            • Retract Away From Origin
          • Stop Toolpath Calculation
          • Tilt tool
            • Automatic
          • Trim and Relink
        • Clearance for tool parts
      • Link
        • Clearance area
          • Advanced options for clearance area
            • Angle steps for feed movements
            • Connection along tool axis
            • Virtual fixture plane
          • Clearance area
            • Automatic
            • Cylinder
            • Plane
            • Sphere
            • Surfaces
          • Incremental clearance plane
          • Tool Orientation
        • Entry/Exit
          • Custom approach/retract link
          • Home position
            • Start from home position - Return to home position
          • Retract to clearance area through tube center
        • Gaps along cut
          • Step
          • Retract to rapid distance
          • Retract to incremental clearance plane
          • Retract to feed distance
          • Retract to clearance area
          • Direct
          • Follow surfaces
          • Clearance blend spline
          • Blend spline
        • Links between slice
          • Step
          • Retract to incremental clearance plane
          • Retract to feed distance
          • Retract to clearance area
          • Follow surfaces
          • Follow stock
          • Direct
          • Clearance blend spline
          • Blend spline
          • Retract to rapid distance
        • Retract Distances
          • Distances
            • Air move safety distance
            • Entry/Exit feed distance
            • Feed distance
            • Rapid distance
            • Rapid distance in tool plane
              • Plane angle
        • Round corners
          • Between approach/retract and link
        • Links between passes
          • Follow stock
          • Follow surfaces
          • Retract to clearance area
          • Retract to incremental clearance plane
          • Retract to rapid distance
          • Step
          • Direct
          • Retract to feed distance
          • Clearance blend spline
          • Blend spline
        • Lead-In/Out
          • Leads options
            • Lead type line
            • Lead type arc
            • Fillet
            • Feed rate
            • Auto arc sweep
            • Additional lead parameters
          • Tool axis orientation
            • Fixed
            • Tangential
              • Maximum lead angle change
            • Tilted
            • User defined direction
          • Type
            • Along tool axis
            • Automatic arc
              • Align towards previous - next cut
              • Automatic tilted automatic arc
            • Fade
            • Horizontal tangential arc
            • Maximum lead angle change
            • Orthogonal arc
            • Orthogonal line
            • Position line
            • Reverse orthogonal line
            • Reverse tangential arc
            • Reverse vertical profile ramp
            • Reverse vertical tangential arc
            • Tangential arc
            • Tangential Line
            • Vertical profile ramp
            • Vertical tangential arc
          • Flip
      • Surface Paths
        • Area
          • 2D Containment
          • Extend/trim
          • Round corners
        • Sorting
          • Start point
        • Surface Quality
      • Tool axis control
        • Common direction
        • Limit by axis angle range
        • Tilting strategies
          • Tool axis will be tilted into plane
          • Tool axis will be tilted relative to cutting direction
            • Set side tilt by
          • Tool axis will be tilted with fixed angle to axis
      • Utility
        • Axial shift
          • Description
          • Constant for each contour
          • Note
        • Tool inspect/change interval
          • Description
          • Distance
          • Number of tools
          • Time
  • Tools
    • General parameters
    • Barrel Mill
    • Bullnose mill
    • Chamfer mill
    • Convex tip mill
    • Dove mill
    • Drill mill
    • End mill
    • Generic revolved tool
      • For surface based machining
    • Lollipop mill
    • Slot mill
    • Sphere mill
    • Taper mill
    • Thread tap
      • Thread Tap Core Diameter
    • Reamer
    • Thread mill
    • Probing tool